Solar Working Station / Solar Work Station for Solar Water Heater/Solar Water Heating System

Solar Working Station / Solar Work Station for Solar Water Heater

1.Inlet
2.Manipulate screen
3.Pump speed adjust switches
4.Temperature difference circulation pump
5.Expansion connector
6.Display screen of flux and temperature
7.Manometer
8.Relieve air valve
9.Safety valve
10.Wall mounting
11.Flow trip connector
12.Return trip connector

Components of pipeline
1.Safety valve:Protects the system components against excessive over-pressure in all operating phases.
2.Ball valve,check valve:Brass material
3.WILO pump:This pump is a standard device in the system,it required operating point can be preselected
Using one of the three levels.
4.Manometer:Adopt hydraulic aseismatic manometer with a range from 0 to 10 bar indicates the system
Pressure.
5.Connect of expansion vessel:Install expansion vessel,avoid the system working at minus pressure.
6.Flow sensor:Timely monitor medium flow of the whole system..
7.Exhaust setting:Adopt spray-paint steel tube, it can release air cause of medium flow in the pipeline.
According air quantity and frequency which cause of system, we can examine whether this system have
Leakage phenomenon.
8.Pipeline temperature display:Medium temperature between right trip and return trip, can be displayed at
First time.Temperature sensors are packed in a tube, Do not need to turn off any parts when replace it.
9.Medium inlet:Turning the handle 90°To left so that medium can be injected in it..
10.Heat preservation material:EPS
11.Screw thread:1/2inch.
12.Maximum working temperature of pipeline:Flow trip(manometer side)150oC

Return trip(pump side)110oC

SP226 Technical data
1.Externality size:450mm*310mm*150mm
2.Max.Self consumption:≤3W
3.Accuracy of temperature measuring:±2oC
4.Range of temperature measuring:0~150oC
5.Power of controlled pump (temperature difference circulation pump, water-using end circulation pump):
<600W
6.Electronical booster power:≤3000W
7.Input signal:3 temperature sensors (for top of tank, for heat collector, for bottom of tank)
8.Output signal:3 (electronic booster, temperature difference circulation pump and water-using end
Circulation pump)
9.System working pressure:8 bar and safety valve response pressure 6 bar.

Installation
Vertically installation,installed at flow and return trip of collector and water tank.As above picture.
Advantage
A.Designed for self-sustaining solar operation
B.Easy installation, save cost, beautiful appearance
C.Easy to check the flux of pipeline, temperature display.
D.Constant air separation during line operation,check system whether have leakage.